Datoteka:1998 OR2 Radar.gif

Viša rezolucija nije dostupna.

1998_OR2_Radar.gif ‎(400 × 400 piksela, veličina datoteke: 1,08 MB, MIME tip: image/gif, animacija se ponavlja, 10 okvira, 1,5 s)

Ova je datoteka sa Zajedničkog poslužitelja i mogu je rabiti drugi projekti. Opis s njezine stranice s opisom datoteke prikazan je ispod.

Sažetak

Opis1998 OR2 Radar.gif	English: Animation of delay-Doppler images from Apr 18 UT.
Datum	18. travnja 2020.
Izvor	http://www.naic.edu/~pradar/press/1998OR2.php
Autor	Arecibo Observatory/NASA/NSF

Licencija

	This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
	Warnings: Use of NASA logos, insignia and emblems is restricted per U.S. law 14 CFR 1221. The NASA website hosts a large number of images from the Soviet/Russian space agency, and other non-American space agencies. These are not necessarily in the public domain. Materials based on Hubble Space Telescope data may be copyrighted if they are not explicitly produced by the STScI.[1] See also {{PD-Hubble}} and {{Cc-Hubble}}. The SOHO (ESA & NASA) joint project implies that all materials created by its probe are copyrighted and require permission for commercial non-educational use. [2] Images featured on the Astronomy Picture of the Day (APOD) web site may be copyrighted. [3] The National Space Science Data Center (NSSDC) site has been known to host copyrighted content. Its photo gallery FAQ states that all of the images in the photo gallery are in the public domain "Unless otherwise noted."

Povijest datoteke

Kliknite na datum/vrijeme kako biste vidjeli datoteku kakva je tada bila.

	Datum/Vrijeme	Minijatura	Dimenzije	Suradnik	Komentar
sadašnja	19:26, 23. travnja 2020.		400 × 400 (1,08 MB)	Nrco0e	Uploaded a work by Arecibo Observatory/NASA/NSF from http://www.naic.edu/~pradar/press/1998OR2.php with UploadWizard

Uporaba datoteke

Na ovu sliku vode poveznice sa sljedećih stranica:

(52768) 1998 OR2

Globalna uporaba datoteke

Sljedeći wikiji rabe ovu datoteku:

Uporaba na ar.wikipedia.org
- (52768) 1998 OR2
Uporaba na arz.wikipedia.org
- (52768) 1998 OR2 (كويكب)
Uporaba na be.wikipedia.org
- (52768) 1998 OR2
Uporaba na en.wikipedia.org
- (52768) 1998 OR2
- List of asteroid close approaches to Earth in 2020
Uporaba na eo.wikipedia.org
- (52768) 1998 OR2
Uporaba na eu.wikipedia.org
- (52768) 1998 OR2
Uporaba na fi.wikipedia.org
- (52768) 1998 OR2
Uporaba na ja.wikipedia.org
- (52768) 1998 OR2
Uporaba na pl.wikipedia.org
- (52768) 1998 OR2
Uporaba na ru.wikipedia.org
- (52768) 1998 OR2
Uporaba na sv.wikipedia.org
- 1998 OR2
Uporaba na vi.wikipedia.org
- (52768) 1998 OR2
Uporaba na www.wikidata.org
- Q8331812

Metapodatci

Ova datoteka sadržava dodatne podatke koje je vjerojatno dodala digitalna kamera ili skener u procesu snimanja odnosno digitalizacije. Ako je datoteka mijenjana, podatci možda nisu u skladu sa stvarnim stanjem.

GIF komentar datoteke

FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -6.45466400328587e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.82322992259287e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -6.50443183758398e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.81660055886823e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -3.99515300841813e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -8.91766944732808e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -9.82426371365364e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -8.59829185628769e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -5.33652837475529e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional 0 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.

Datoteka:1998 OR2 Radar.gif

Sažetak

Licencija

Opisi

Predmeti prikazani u ovoj datoteci

motiv

(52768) 1998 OR2

nastanak

18. travnja 2020

vrsta medija

image/gif

checksum ^engleski

9d1afd27a456ca9a88cd538f75ce6e3c02064534

data size ^engleski

1.134.988 Bajt

trajanje

1,5 sekunda

visina

400 točka

širina

400 točka

Povijest datoteke

Uporaba datoteke

Globalna uporaba datoteke

Metapodatci

Sažetak

Licencija

Opisi

Predmeti prikazani u ovoj datoteci

motiv

(52768) 1998 OR2

nastanak

18. travnja 2020

vrsta medija

image/gif

checksum engleski

9d1afd27a456ca9a88cd538f75ce6e3c02064534

data size engleski

1.134.988 Bajt

trajanje

1,5 sekunda

visina

400 točka

širina

400 točka

Povijest datoteke

Uporaba datoteke

Globalna uporaba datoteke

Metapodatci

checksum ^engleski

data size ^engleski